For the first time since the beginning of the intense working activities there were four of us present in the “evening shift” – Boki, Davor, Niko and Oli.We had only three workbenches, so Oli’s two angle modules were used as a workbench.
Continue reading “Additional foam and making of a dry creek”
We began landscaping
We were very productive on Saturday afternoon.
At the beginning of session, we switched polarity on both switches on Oli’s station, which had caused us some troubles when we did test driving last time.
Continue reading “We began landscaping”
First run!!!!
To cut the long story short – we did our First run!
First on four straight modules, second on another four straight combined with one angle module, and finally on the remain two angle modules.
Some cleaning, adjusting and even soldering was needed, but – it works!
Wiring of turnouts
Tonight’s team consisted of Oli and Davor. I two and half hours we have managed to solder, drill and connect wires Continue reading “Wiring of turnouts”
Wiring (again)
We could not move further towards some nicer layout modelling activities because of so many wires needed. Tonight Boki and Davor spent the whole evening with soldering iron in their hands. Continue reading “Wiring (again)”
Work on modules resumes
After some time off we got back on working on our modules.
We have a goal to reach until the end of the October and that is all modules in “driving” condition.
Davor and Boki spent two days assembling last of the modules and putting down missing track on some of them.
Since we started working in a garage we had some issues with gathering together all the tools and materials but me managed to overcame that and work has been progressing.
