{"id":898,"date":"2015-09-25T20:01:01","date_gmt":"2015-09-25T19:01:01","guid":{"rendered":"http:\/\/www.boki.com.hr\/elpeso\/?p=898"},"modified":"2015-09-25T20:01:01","modified_gmt":"2015-09-25T19:01:01","slug":"retaining-wall-on-mine-module","status":"publish","type":"post","link":"https:\/\/www.boki.com.hr\/elpeso\/buildings\/retaining-wall-on-mine-module\/","title":{"rendered":"Retaining wall on mine module"},"content":{"rendered":"

Retaining wall was needed on mine module where narrow gauge line is descending towards the mine itself. Between wooden one and carved stone one we decided on former. It turned out to be a nice, relaxed 2 evening project.Dimensions and spacing was taken from pictures of real ones. Beams are cut from balsa strips, glued together using white glue. Beam frame has only three sides but fourth one was added to bottom (w\/o glue) to keep everything square. Planks are cut from coffee stirrer which are bit on a thick side but its thickness can\u2019t be seen since they will be mounted on the back of the beams. Width of the planks is right on. Since wall has a \u201ckink\u201d in middle, planks are cut for the length of two spaces on one side and three spaces on another (to avoid too much gluing).<\/p>\n